VelocityAP Release Bearing Slave Cylinder for Audi R8 / Lamborghini Gallardo - Manual / E-Gear / R-Tronic (Replaces 086141671 / 086141671M)

VEL-SLAVETWINORGV2

Stock: In Stock

RRP AU$1,099.00

AU$934.15 Inc GST

Save: AU$164.85 - 15% OFF

Description

Description

Due to the age and condition of these vehicles, hydraulic-system issues are now causing failures. VelocityAP has heard from customers who have seen OEM bearings fail within 2000 miles, which is indicative of underlying issues. VelocityAP strongly recommends complete fluid replacement and inspection and testing of every component in the system during installation.

Particulate contamination and metallic debris can cause significant damage. A hydraulic release bearing or slave cylinder has a dynamic seal that moves repeatedly across a precision bore or piston surface. Fine, hard particles can become trapped between the seal lip and its running surface, effectively turning the fluid into a lapping compound. Particle sizes particularly associated with hydraulic wear are roughly within the 4, 6 and 14 micron ranges, making the contamination far smaller than can readily be seen. The pump element, valve block, actuator bores, damaged fittings or ports, and debris introduced during previous work can all contribute. Audi issued an R-Tronic TSB in which damaged hydraulic sealing elements were traced to poorly deburred valve attachment ports in the hydraulic unit, demonstrating the importance of cleanliness to seal longevity.

Incorrect or chemically contaminated fluid can also cause failures. Contamination with ATF, conventional power-steering oil, solvent, cleaning fluid or similar substances can affect seal durability. Seal manufacturers emphasise that elastomer life depends heavily on chemical compatibility, as incompatible media can cause swelling, softening, shrinkage, hardening or cracking.

VelocityAP strongly recommends replacing all hydraulic fluid in the system during installation. Excessive temperature and fluid ageing degrade hydraulic oil and can accelerate corrosion and component wear. Free water is particularly undesirable and can be present once temperature solubility levels are breached, such as when the original clutch or bearing overheated and failed.

The main system operates at about 40-50 bar, but pressure at the bearing is controlled downstream. A sticky clutch-control valve, contaminated valve spool, pressure-regulation issue or unusual transient can cause pressure fluctuations that the seal is not designed to withstand. This includes a weak or failing accumulator.

Fitment

Fitment

Fits the following vehicles:

  • Audi R8
  • Lamborghini Gallardo
  • Product Question

To top