ST Wheel Spacer System A2 40mm per Axle 5x114.3/67.1 for Hyundai (NE) Ioniq 5 N

56010441
ST Suspension

Stock: Backorder Available

AU$329.00 Inc GST

Description

Description

ST's A2 is a bolt-on wheel spacer system for vehicles with wheel studs. Pressed-in threaded studs are used; the spacer attaches to the hub with the supplied nuts, and the wheel is then fitted with the original wheel nuts. This part is listed for the Hyundai Ioniq 5 N (NE).

Key Features

  • Pressed-in threaded studs
  • Black anodised for corrosion protection
  • Wider track for a more planted stance

Specifications

  • Width: 40 mm per axle (20 mm per wheel)
  • Bolt pattern (PCD): 5x114.3
  • Centre bore: 67.1 mm
  • Mounting: Bolt-on (spacer bolts to the hub; wheel fits to the spacer)
  • Vehicle wheel fastening: Wheel nuts, M14x1.5
  • Position: Front or rear axle
  • Supplied as: Set (2 pcs including wheel nuts)

Fitment

Fitment

References 317, 329. See the Disclaimer tab for reference notes.

Wheel mounting

Bolt pattern5x114.3
Hub bore67.1mm
Width per axle40mm
SystemA2
ThreadNut: M14x1.5 Taper 60°
Wheel offset limit28.5
Supplied asSet (2 pcs. incl. wheel nuts)

Disclaimer

Disclaimer

  • Note 317: Attention: Installation only possible at rims with corresponding holes on the back. The depth of the pockets must be larger than the remaining length of the studs, which protrude from the wheel spacers after assembly.
  • Note 329: Please consider the maximum total offset and all mentioned notes and restrictions in the certificate. The total offset is the result of the difference of the offset at the used wheel and the thickness of the wheel spacers (for example rim offset+35mm & wheel spacers 15mm = total offset +20mm).

  • Product Question

To top