KW Coilover Kit V1 for Audi (89) S2 / Coupe - M14 Front Strut Bolt

10210014

Stock: Backorder Available

RRP AU$3,099.00

AU$2,169.30 Inc GST

Save: AU$929.70 - 30% OFF

  • For cars with M14 screw at the FA strut down below

Description

Description

KW's V1 is the entry model in its street coilover range, pairing height-adjustable struts with a damper setup that KW pre-configures for each vehicle. Ride height is continuously adjustable within the tested range using a dirt-resistant trapezoidal thread and composite collar, so it can still be changed easily years after fitting. Corrosion-resistant springs and bump stops are built for a long service life. This kit is developed for the Audi S2 Coupe / Coupe quattro (B3).

Key Features

  • Vehicle-specific, factory-set damping
  • Continuous ride height adjustment within the tested range
  • Trapezoidal thread with composite adjuster collar

Specifications

  • Version: V1
  • Damping: Fixed, vehicle-specific setting
  • Material: Stainless steel
  • Front lowering: 30–60 mm
  • Rear lowering: 30–60 mm
  • Front axle load: 951–1,100 kg
  • Rear axle load: up to 950 kg
  • Supplied as: Front axle + rear axle coilover struts
Note For cars with M14 screw at the front axle strut down below.

Fitment

Fitment

Front axle load 951–1,100 kg; Rear axle load up to 950 kg.

For cars with M14 screw at the FA strut down below.

See the Disclaimer tab for reference notes.

YearMakeModelVariantEngineDriveRefs
1988–1996AudiCoupe (89) 8B, 89QS2 quattroPetrol · 162 kW · 2.2L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89QS2 quattroPetrol · 169 kW · 2.2L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.3 quattroPetrol · 98 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.6 quattroPetrol · 110 kW · 2.6L · 6-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.8 quattroPetrol · 128 kW · 2.8L · 6-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.3 20V quattroPetrol · 125 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12

Media

Disclaimer

Disclaimer

  • Note 1: Height adjustable on the front and rear axles (threaded strut housings).
  • Note 6: When using original tyres, wheel offset spacers may be required.
  • Note 12: To identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14.
  • Product Question

To top