KW Coilover Kit V1 Classic Line for Audi (B3) 80 / 90 / (89) Coupe - M12 Front and Rear Strut Bolts

10210913-B
KW Suspension

Stock: Backorder Available

AU$3,069.00 Inc GST
  • For cars with M12 screw at the FA + RA strut

Description

Description

KW's V1 is the entry model in its street coilover range, pairing height-adjustable struts with a damper setup that KW pre-configures for each vehicle. Ride height is continuously adjustable within the tested range using a dirt-resistant trapezoidal thread and composite collar, so it can still be changed easily years after fitting. Corrosion-resistant springs and bump stops are built for a long service life. This kit is developed for the Audi 80 quattro / 90 quattro (B3) / Coupe quattro (89).

Key Features

  • Vehicle-specific, factory-set damping
  • Continuous ride height adjustment within the tested range
  • Trapezoidal thread with composite adjuster collar

Specifications

  • Version: V1 classic line
  • Damping: Fixed, vehicle-specific setting
  • Material: Stainless steel
  • Front lowering: 30–60 mm
  • Rear lowering: 30–60 mm
  • Front axle load: up to 950 kg
  • Rear axle load: up to 950 kg
  • Supplied as: Front axle + rear axle coilover struts
Note For cars with M12 screw at the front axle + rear axle strut.

Fitment

Fitment

Front axle load up to 950 kg; Rear axle load up to 950 kg.

For cars with M12 screw at the FA + RA strut.

See the Disclaimer tab for reference notes.

YearMakeModelVariantEngineDriveRefs
1986–1991Audi80 (B3) 89, 89Q, 8A, SF21.8 E quattroPetrol · 82 kW · 1.8L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF21.8 S quattroPetrol · 65 kW · 1.8L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF21.8 S quattroPetrol · 66 kW · 1.8L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF21.8 quattroPetrol · 83 kW · 1.8L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF21.9 quattroPetrol · 83 kW · 1.8L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF22.0 E 16V quattroPetrol · 101 kW · 2.0L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF22.0 E quattroPetrol · 83 kW · 2.0L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF22.0 quattroPetrol · 82 kW · 2.0L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF22.0 quattroPetrol · 85 kW · 2.0L · 4-cylAll-Wheel Drive1, 6, 12
1986–1991Audi80 (B3) 89, 89Q, 8A, SF22.3 quattroPetrol · 98 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1987–1991Audi90 (B3) 89, 89Q, 8A2.0 20 V quattroPetrol · 118 kW · 2.0L · 5-cylAll-Wheel Drive1, 6, 12
1987–1991Audi90 (B3) 89, 89Q, 8A2.0 quattroPetrol · 101 kW · 2.0L · 4-cylAll-Wheel Drive1, 6, 12
1987–1991Audi90 (B3) 89, 89Q, 8A2.2 E quattroPetrol · 100 kW · 2.2L · 5-cylAll-Wheel Drive1, 6, 12
1987–1991Audi90 (B3) 89, 89Q, 8A2.3 E 20V quattroPetrol · 123 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1987–1991Audi90 (B3) 89, 89Q, 8A2.3 E 20V quattroPetrol · 125 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1987–1991Audi90 (B3) 89, 89Q, 8A2.3 E quattroPetrol · 98 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1987–1991Audi90 (B3) 89, 89Q, 8A2.3 E quattroPetrol · 100 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.0 20 V quattroPetrol · 118 kW · 2.0L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.2 quattroPetrol · 100 kW · 2.2L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.3 20V quattroPetrol · 123 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.3 20V quattroPetrol · 125 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.3 quattroPetrol · 98 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12
1988–1996AudiCoupe (89) 8B, 89Q2.3 quattroPetrol · 100 kW · 2.3L · 5-cylAll-Wheel Drive1, 6, 12

Media

Media

Disclaimer

Disclaimer

  • Note 1: Height adjustable on the front and rear axles (threaded strut housings).
  • Note 6: When using original tyres, wheel offset spacers may be required.
  • Note 12: To identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14.

  • Product Question

To top