Akrapovic Exhaust System for Audi RS 3 Sedan (8Y) brings together the parts below; open a part for its details.
What’s in this kit
Included
S-AU/TI/28HIncluded in the kitAkrapovic Evolution Line (Titanium) for Audi RS 3 Sedan (8Y)
The Evolution Line (Titanium) for the Audi RS 3 Sedan (8Y) is built from high-grade titanium tubes and a muffler, attached to the stock downpipes with a high-quality stainless steel link pipe. It is finished with handcrafted carbon-fibre tailpipes and a titanium inner sleeve.
Key Features
- 36.2% lighter than the standard setup
- Dyno-tested against a standard RS 3 exhaust: +7.5 kW (10.2 hp) at 5,450 rpm and +8.8 Nm at 3,900 rpm
- The in-house foundry casts the housings for the two exhaust valves, one on each side of the muffler, to tailor the sound
- The five-cylinder engine gives a relaxed purr in comfort mode, a tasteful reminder of the car's potential in dynamic mode, and the full sound experience when accelerating
- Optional high-gloss handmade rear carbon-fibre diffuser and Akrapovic Sound Kit for full control over the exhaust tones
Specifications
- Material: Titanium
- Homologation: ECE Type Approval
- Weight: 14.61 kg
- Installation time: 210 min
Note ECE type approved for cars equipped with an Otto/petrol particulate filter. If the Akrapovic Sound Kit is fitted, the ECE type-approval certificate is not valid.
Required - choose one
P-HF1636Required: choose oneAkrapovic Exhaust Valve Control Kit for Audi RS 3 Sportback / Sedan (8Y) 2025+ - After Facelift
Akrapovic's Control Kit for vehicles after facelift, for the Audi RS 3 Sportback and Sedan (8Y), 2025-2026, including OPF/GPF models. Akrapovic lists this kit as mandatory when fitting its Evolution Line (Titanium) exhaust to the facelifted RS 3.
Note For facelifted RS 3 (8Y) models from 2025 only. Pre-facelift 2022-2024 cars use the separate Control Kit for vehicles before facelift.
P-HF1431Required: choose oneAkrapovic Exhaust Valve Control Kit for Audi RS 3 Sportback / Sedan (8Y) 2022-2024 - Before Facelift
Akrapovic's Control Kit for vehicles before facelift, for the Audi RS 3 Sportback and Sedan (8Y), 2022-2024, including OPF/GPF models. Akrapovic lists this kit as mandatory when fitting its Evolution Line exhaust to the pre-facelift RS 3.
Note For pre-facelift RS 3 (8Y) models, 2022-2024 only. Facelifted 2025+ cars need the Control Kit for vehicles after facelift.
Optional
P-HF1433Optional add-onAkrapovic Sound Kit (Exhaust Valve Remote) for Audi RS 3 Sportback / Sedan (8Y)
The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver (already included in evolution system) to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller to regulate the valves.
With the use of the optional Akrapovic Sound Kit, the ECE type approval is no longer valid.
Specifications
- Installation time: 90 min
DI-AU/CA/2/GOptional add-onAkrapovic Rear Carbon Fibre Diffuser for Audi RS 3 Sportback / Sedan (8Y) 2022-2024 - Gloss
This high-gloss handcrafted accessory has been designed to integrate perfectly with the lines of the Audi RS 3. It was created from scratch to offer an impeccable enhancement to the new tailpipes on the Evolution Line (Titanium) exhaust system.
Specifications
- Material: Carbon fibre
- Finish: High gloss
- Type approval: ABE
Note The diffuser cannot fit with genuine trailer tow hitch. With the Akrapovic diffuser, the hands-free trunk-lid opening/closing sensor does not work.
Note DI-AU/CA/2/G and P-HF1431 fit the Audi RS 3 Sedan (8Y) 2022-2024 only.
Note P-HF1636 fits the Audi RS 3 Sedan (8Y) 2025-2026 only.
Note Control kit: P-HF1431 for cars built before the facelift, P-HF1636 for cars built after it.
