The Redstar Loop-X Exhaust System is a 3" non-valved replacement for the factory exhaust on the McLaren 765LT (2020-2022) with the 4.0-litre twin-turbo engine. Redstar states it adds a distinctive tone to the exhaust note. The system is built in two steps: first the exhaust in Stainless Steel, Inconel or Titanium, with or without a heat shield, then the tips.
Key Features
- Optional Redstar Titanium Oversized or Titanium 3D Printed Hex tips in black ceramic
- OEM-spec flanges with all brackets and mounts as on the OEM unit
- 100% TIG welded and back purged
Specifications
- Brand: Redstar Exhaust
- Vehicle: McLaren 765LT (2020-2022)
- Engine: 4.0L twin-turbo
- Pipe diameter: 3"
- Valves: None
- Material: Stainless Steel, Inconel or Titanium
- Heat shield: Optional (Stainless Steel and Inconel only)
- Installation: Bolt-on
What’s in this system
Required - choose one: Exhaust System
765SS-LXRequired: choose oneRedstar Stainless Steel 3" Loop-X Exhaust for McLaren 765LT - Non-Valved
Redstar's Loop-X exhaust is a 3" replacement for the factory exhaust on the McLaren 765LT (2020-2022) with its 4.0-litre twin-turbo engine. The system runs without valves and is designed to reuse the factory (OE) exhaust tips. Redstar builds it with OEM-spec flanges and the same brackets and mounts as the factory unit for a bolt-on installation, with every joint TIG welded and back purged. Redstar states the system adds a distinctive tone to the exhaust note.
Key Features
- Loop-X design with 3" piping
- No valves; reuses the OE exhaust tips
- 100% TIG welded and back purged
- OEM-spec flanges
- All brackets and mounts as on the OEM unit
- 100% bolt-on installation
Specifications
- Engine: 4.0L twin-turbo
- Pipe diameter: 3"
- Valves: None
- Exhaust tips: Reuses OE tips
- Construction: 100% TIG welded and back purged
- Material: Stainless Steel
- Heat shield: Not included
765INC-LXRequired: choose oneRedstar Inconel 3" Loop-X Exhaust for McLaren 765LT - Non-Valved
The system runs without valves and is designed to reuse the factory (OE) exhaust tips. Redstar states the system adds a distinctive tone to the exhaust note.
Key Features
- Loop-X design with 3" piping
- No valves; reuses the OE exhaust tips
- 100% TIG welded and back purged
- OEM-spec flanges
- All brackets and mounts as on the OEM unit
- 100% bolt-on installation
Specifications
- Engine: 4.0L twin-turbo
- Pipe diameter: 3"
- Valves: None
- Exhaust tips: Reuses OE tips
- Construction: 100% TIG welded and back purged
- Material: Inconel
- Heat shield: Not included
765TI-LXRequired: choose oneRedstar Titanium 3" Loop-X Exhaust for McLaren 765LT - Non-Valved
The system runs without valves and is designed to reuse the factory (OE) exhaust tips. Redstar states the system adds a distinctive tone to the exhaust note.
Key Features
- Loop-X design with 3" piping
- No valves; reuses the OE exhaust tips
- 100% TIG welded and back purged
- OEM-spec flanges
- All brackets and mounts as on the OEM unit
- 100% bolt-on installation
Specifications
- Engine: 4.0L twin-turbo
- Pipe diameter: 3"
- Valves: None
- Exhaust tips: Reuses OE tips
- Construction: 100% TIG welded and back purged
- Material: Titanium
- Heat shield: Not included
765SS-LX-HSRequired: choose oneRedstar Heat Shielded Stainless Steel 3" Loop-X Exhaust for McLaren 765LT - Non-Valved
The system runs without valves and is designed to reuse the factory (OE) exhaust tips. Redstar states the system adds a distinctive tone to the exhaust note.
Key Features
- Loop-X design with 3" piping
- No valves; reuses the OE exhaust tips
- 100% TIG welded and back purged
- OEM-spec flanges
- All brackets and mounts as on the OEM unit
- 100% bolt-on installation
Specifications
- Engine: 4.0L twin-turbo
- Pipe diameter: 3"
- Valves: None
- Exhaust tips: Reuses OE tips
- Construction: 100% TIG welded and back purged
- Material: Stainless Steel
- Heat shield: Included
765INC-LX-HSRequired: choose oneRedstar Heat Shielded Inconel 3" Loop-X Exhaust for McLaren 765LT - Non-Valved
The system runs without valves and is designed to reuse the factory (OE) exhaust tips. Redstar states the system adds a distinctive tone to the exhaust note.
Key Features
- Loop-X design with 3" piping
- No valves; reuses the OE exhaust tips
- 100% TIG welded and back purged
- OEM-spec flanges
- All brackets and mounts as on the OEM unit
- 100% bolt-on installation
Specifications
- Engine: 4.0L twin-turbo
- Pipe diameter: 3"
- Valves: None
- Exhaust tips: Reuses OE tips
- Construction: 100% TIG welded and back purged
- Material: Inconel
- Heat shield: Included
Optional: Tips
765TI-TIPSOptional: choose oneRedstar Titanium Oversized Exhaust Tips for McLaren 765LT
Redstar's oversized exhaust tips are a bolt-on finishing upgrade for the McLaren 765LT (2020-2022). They fit at the rear valance and are designed to work with either the factory exhaust or a Redstar exhaust system. Redstar uses OEM-spec flanges and factory-style brackets and mounts so the tips sit in the correct position, and each assembly is 100% TIG welded and back purged for clean, consistent joints.
Key Features
- 100% TIG welded and back purged
- OEM-spec flanges
- Factory-style brackets and mounts
- Bolt-on installation
- Suits the factory exhaust or Redstar exhaust systems
Specifications
- Finish: Black ceramic coating
- Vehicle: McLaren 765LT (2020-2022)
- Material: Titanium
765TI-3DTIPSOptional: choose oneRedstar Titanium 3D Printed Exhaust Tips for McLaren 765LT
Redstar's 3D printed hex exhaust tips for the McLaren 765LT replace the factory exhaust outlets as a bolt-on upgrade. They suit the 2020-2022 McLaren 765LT with the 4.0-litre twin-turbocharged engine, and Redstar designs them to fit both the stock exhaust and Redstar's own exhaust systems. OEM-spec flanges and factory-style brackets and mounts carry over the original mounting points, and the tips are finished in ceramic coated black.
Key Features
- 100% bolt-on installation
- Fits the stock exhaust and Redstar exhaust systems
- 100% TIG welded and back purged
- OEM-spec flanges
- All brackets and mounts as on the OEM unit
Specifications
- Engine: 4.0L twin-turbo
- Construction: 3D printed
- Tip shape: Hex
- Finish: Ceramic Coated Black
- Material: Titanium
Note The system is designed to reuse the factory (OE) exhaust tips: choose 'None - Reuse OE Tips' to keep them, or pick a Redstar tip set.
Note The heat shielded version is offered in Stainless Steel and Inconel only; the Titanium system comes without a heat shield.
