Click to enlarge
Inc GST $2,099.00


Enter post code to calculate



Standard Delivery - Inc GST $15.00
Road delivery Australia wide.

V1 inox Alfa Spider 939...

KW Variant 1 inox-line

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling


Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".

ManufacturerModelTypeDetailsBodyYearLowering FALowering RAWeight FAWeight RA
ALFA ROMEO159 (939_) (06/2005-12/2012)939_2.4 JTDM (939AXD12, 939AXD1B) - Diesel - 147kw - 2387ccmSaloon09/2005-20-5025-551251-1300-1100
ALFA ROMEO159 (939_) (06/2005-12/2012)939_2.4 JTDM (939AXD) - Diesel - 154kw - 2387ccmSaloon09/2005-20-5025-551251-1300-1100
ALFA ROMEO159 (939_) (06/2005-12/2012)939_2.4 JTDM Q4 (939AXMB2) - Diesel - 154kw - 2387ccmSaloon09/2005-20-5025-551251-1300-1100
ALFA ROMEO159 (939_) (06/2005-12/2012)939_3.2 JTS Q4 (939AXH1B, 939AXG22) - Petrol - 191kw - 3195ccmSaloon09/2005-20-5025-551251-1300-1100
ALFA ROMEOBRERA (939_) (01/2006-05/2011)939_2.4 JTDM 20V - Diesel - 154kw - 2387ccmHatchback02/2006-20-5025-551251-1300-1100
ALFA ROMEOBRERA (939_) (01/2006-05/2011)939_2.4 JTDM 20V - Diesel - 147kw - 2387ccmHatchback02/2006-20-5025-551251-1300-1100
ALFA ROMEOBRERA (939_) (01/2006-05/2011)939_3.2 JTS Q4 (939.DXG22) - Petrol - 191kw - 3195ccmHatchback02/2006-20-5025-551251-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_2.2 JTS - Petrol - 136kw - 2198ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_3.2 JTS Q4 - Petrol - 191kw - 3195ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_2.4 JTDM - Diesel - 147kw - 2387ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_3.2 JTS (939EXG2B) - Petrol - 191kw - 3195ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_2.4 JTDM - Diesel - 154kw - 2387ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_1.8 TBi (939DXN1B) - Petrol - 147kw - 1742ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_2.0 JTDM - Diesel - 125kw - 1956ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEOSPIDER (939_) (03/2006-03/2011)939_2.0 JTDM - Diesel - 120kw - 1956ccmConvertible09/2006-20-5025-55-1300-1100
ALFA ROMEO159 (939_) (06/2005-12/2012)939_2.2 Q4 - Petrol - 136kw - 2198ccmSaloon09/2005-20-5025-551251-1300-1100
ALFA ROMEOBRERA (939_) (01/2006-05/2011)939_2.2 JTS (939.DXB11) - Petrol - 136kw - 2198ccmHatchback02/2006-20-5025-551251-1300-1100
1=Height adjustable on the front and rear axles (threaded strut housings) - 94=Specific damping variants only available while stocks last. For further information please send an email to gewindefahrwerke@kwautomotive.de - 81=At vehicles with four-wheel-drive the coilover kit variant 3 can only be used in combination with wheels with a size of 17“ and higher.

Prices are subject to change without notice.

Scuderia Autoart reserves the right to vary prices in the event of changes due to the exchange rate, price increases, tax changes, import changes or any other reasons. Scuderia Autoart does not accept any liability for increase in prices. Quotes on pricing are appropriate to the particular product at the time of quoting and may change.

Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing. The final product received being different from the product image on the website does not qualify for grounds for return or refund.


SKU 10215015
Barcode # 4250173355247
Brand KW

KW Automotive Warranty

Effective January 1, 2011. Supersedes all previous terms, policies, and agreements. Not withstanding applicable Australian Law.

KW Suspensions
  • Street Coilovers , Variant 1, Variant 2, Variant 3, Street Comfort and Club Sport Coilovers; 2 Yr/Unlimited Kilometre Warranty.
  • Hydraulic Lift Systems (HLS), Dynamic Lift Control (DLC), Dynamic Damper Control (DDC); 2 Yr/Unlimited Kilometre Warranty.
  • Bushings, Bump stops and Ball Joints; 1Yr/Unlimited Kilometre Warranty.
  • Competition Suspension, 2 and 3 way Race Coilovers; No Warranty.
Warranty Conditions and Limitations
This warranty is NOT TRANSFERRABLE and is limited to Australia. This warranty does not apply to any article not purchased through authorised KW Automotive Australia/Scuderia Autoart Pty Ltd dealers.
This warranty does not apply to:
  • Any articles that show signs of abuse, collision or improper installation.
  • OEM Equipment; Private label items produced by KW automotive (warranty is carried by the private label company unless otherwise specified). Any parts that are installed in vehicles that are used for race purposes, operated commercially, or used in off road conditions.
  • Any parts that have been sold with "No Warranty" designation on the original invoice.
  • Any parts that have been modified or altered in any way from its original configuration.
  • Any parts that have been:
    • Installed improperly.
    • Used out of its published operating range or outside KW tested force ranges, i.e.
      • Used in conjunction with non Non-KW Automotive Australia/Scuderia Autoart Pty ltd approved Air Bag kits, sway bars, springs, control arms etc...
      • Excessively lowered or raised vehicles.

Please see your Dealer or contact us for further warranty claim information

Be The First To Review This Product!


Help other Scuderia Autoart Pty Ltd users shop smarter by writing reviews for products you have purchased.

Click here to write a product review