The Redstar High Frequency Exhaust System is a 3.5" X-pipe exhaust for the McLaren 765LT (2020-2022), developed to give it a high-pitched, exotic supercar exhaust note. The system is built in three steps: the exhaust, then the tips, then the matching 3.5" downpipes.
Key Features
- Exhaust in Stainless Steel, Inconel or Titanium, with heat shielded versions in Stainless Steel and Inconel
- Tips: re-use the factory (OEM) tips, or add Redstar Titanium Oversized or Titanium 3D Printed Hex tips in black ceramic
- Downpipes: HJS HD 200cpsi 130 mm catted or catless, in Stainless Steel or Inconel, with or without heat shield
Specifications
- Vehicle: McLaren 765LT (2020-2022)
- Layout: X-pipe
- Pipe diameter: 3.5"
- Installation: Bolt-on, OEM-spec flanges and mounting points
What’s in this system
Required - choose one: Exhaust System
765SS-RXRequired: choose oneRedstar Stainless Steel 3.5" High Frequency X-Pipe Exhaust for McLaren 765LT
Redstar's High Frequency Exhaust System is a 3.5" X-pipe exhaust for the McLaren 765LT (2020-2022). Redstar developed it to give the 765LT a high-pitched, exotic supercar exhaust note. The system uses OEM-spec flanges and mounting points for a bolt-on fit, and it is designed to re-use the factory (OEM) exhaust tips. Redstar specifies that its 3.5" exhaust systems for the 765LT must be paired with matching 3.5" downpipes.
Key Features
- 3.5" X-pipe layout
- OEM-spec flanges and mounting points
- Bolt-on installation
- Re-uses the OEM exhaust tips
Specifications
- Layout: X-pipe
- Pipe diameter: 3.5"
- Exhaust tips: Re-uses OEM tips
- Requires: Matching 3.5" downpipes
- Material: Stainless Steel
- Heat shield: Not included
765INC-RXRequired: choose oneRedstar Inconel 3.5" High Frequency X-Pipe Exhaust for McLaren 765LT
Redstar developed it to give the 765LT a high-pitched, exotic supercar exhaust note.
Key Features
- 3.5" X-pipe layout
- OEM-spec flanges and mounting points
- Bolt-on installation
- Re-uses the OEM exhaust tips
Specifications
- Layout: X-pipe
- Pipe diameter: 3.5"
- Exhaust tips: Re-uses OEM tips
- Requires: Matching 3.5" downpipes
- Material: Inconel
- Heat shield: Not included
765TI-RXRequired: choose oneRedstar Titanium 3.5" High Frequency X-Pipe Exhaust for McLaren 765LT
Redstar developed it to give the 765LT a high-pitched, exotic supercar exhaust note.
Key Features
- 3.5" X-pipe layout
- OEM-spec flanges and mounting points
- Bolt-on installation
- Re-uses the OEM exhaust tips
Specifications
- Layout: X-pipe
- Pipe diameter: 3.5"
- Exhaust tips: Re-uses OEM tips
- Requires: Matching 3.5" downpipes
- Material: Titanium
- Heat shield: Not included
765SS-RX-HSRequired: choose oneRedstar Heat Shielded Stainless Steel 3.5" High Frequency X-Pipe Exhaust for McLaren 765LT
Redstar developed it to give the 765LT a high-pitched, exotic supercar exhaust note.
Key Features
- 3.5" X-pipe layout
- OEM-spec flanges and mounting points
- Bolt-on installation
- Re-uses the OEM exhaust tips
Specifications
- Layout: X-pipe
- Pipe diameter: 3.5"
- Exhaust tips: Re-uses OEM tips
- Requires: Matching 3.5" downpipes
- Material: Stainless Steel
- Heat shield: Included
765INC-RX-HSRequired: choose oneRedstar Heat Shielded Inconel 3.5" High Frequency X-Pipe Exhaust for McLaren 765LT
Redstar developed it to give the 765LT a high-pitched, exotic supercar exhaust note.
Key Features
- 3.5" X-pipe layout
- OEM-spec flanges and mounting points
- Bolt-on installation
- Re-uses the OEM exhaust tips
Specifications
- Layout: X-pipe
- Pipe diameter: 3.5"
- Exhaust tips: Re-uses OEM tips
- Requires: Matching 3.5" downpipes
- Material: Inconel
- Heat shield: Included
Optional: Tips
765TI-TIPSOptional: choose oneRedstar Titanium Oversized Exhaust Tips for McLaren 765LT
Redstar's oversized exhaust tips are a bolt-on finishing upgrade for the McLaren 765LT (2020-2022). They fit at the rear valance and are designed to work with either the factory exhaust or a Redstar exhaust system. Redstar uses OEM-spec flanges and factory-style brackets and mounts so the tips sit in the correct position, and each assembly is 100% TIG welded and back purged for clean, consistent joints.
Key Features
- 100% TIG welded and back purged
- OEM-spec flanges
- Factory-style brackets and mounts
- Bolt-on installation
- Suits the factory exhaust or Redstar exhaust systems
Specifications
- Finish: Black ceramic coating
- Vehicle: McLaren 765LT (2020-2022)
- Material: Titanium
765TI-3DTIPSOptional: choose oneRedstar Titanium 3D Printed Exhaust Tips for McLaren 765LT
Redstar's 3D printed hex exhaust tips for the McLaren 765LT replace the factory exhaust outlets as a bolt-on upgrade. They suit the 2020-2022 McLaren 765LT with the 4.0-litre twin-turbocharged engine, and Redstar designs them to fit both the stock exhaust and Redstar's own exhaust systems. OEM-spec flanges and factory-style brackets and mounts carry over the original mounting points, and the tips are finished in ceramic coated black.
Key Features
- 100% bolt-on installation
- Fits the stock exhaust and Redstar exhaust systems
- 100% TIG welded and back purged
- OEM-spec flanges
- All brackets and mounts as on the OEM unit
Specifications
- Engine: 4.0L twin-turbo
- Construction: 3D printed
- Tip shape: Hex
- Finish: Ceramic Coated Black
- Material: Titanium
Required - choose one: Downpipes (3.5")
765SS-DP130Required: choose oneRedstar Stainless Steel HJS HD 200CPSI 130 mm Extended Downpipes for McLaren 765LT
Redstar's extended performance downpipes for the McLaren 765LT replace the factory downpipe section on the M840T 4.0-litre twin-turbo V8. Built around 3.5" piping, the design reduces backpressure to sharpen throttle response and quicken turbo spool, while giving a richer exhaust note. Redstar specifies these 3.5" downpipes as the required match for its 3.5" 765LT exhaust systems.
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Stainless Steel
- Catalytic converter: HJS HD 200cpsi 130 mm
- Heat shield: Not included
765SS-DP130-HSRequired: choose oneRedstar Heat Shielded Stainless Steel HJS HD 200CPSI 130 mm Extended Downpipes for McLaren 765LT
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Stainless Steel
- Catalytic converter: HJS HD 200cpsi 130 mm
- Heat shield: Included
765INC-DP130Required: choose oneRedstar Inconel HJS HD 200CPSI 130 mm Extended Downpipes for McLaren 765LT
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Inconel
- Catalytic converter: HJS HD 200cpsi 130 mm
- Heat shield: Not included
765INC-DP130-HSRequired: choose oneRedstar Heat Shielded Inconel HJS HD 200CPSI 130 mm Extended Downpipes for McLaren 765LT
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Inconel
- Catalytic converter: HJS HD 200cpsi 130 mm
- Heat shield: Included
765SS-DPCLRequired: choose oneRedstar Stainless Steel Catless Extended Downpipes for McLaren 765LT
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Stainless Steel
- Catalytic converter: Catless
- Heat shield: Not included
Note For off-road and motorsport use only. This part is not designed to meet emissions or noise standards and is not for use on public roads.
765SS-DPCL-HSRequired: choose oneRedstar Heat Shielded Stainless Steel Catless Extended Downpipes for McLaren 765LT
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Stainless Steel
- Catalytic converter: Catless
- Heat shield: Included
Note For off-road and motorsport use only.
765INC-DPCLRequired: choose oneRedstar Inconel Catless Extended Downpipes for McLaren 765LT
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Inconel
- Catalytic converter: Catless
- Heat shield: Not included
Note For off-road and motorsport use only.
765INC-DPCL-HSRequired: choose oneRedstar Heat Shielded Inconel Catless Extended Downpipes for McLaren 765LT
Key Features
- Extended downpipe design for the 765LT
- 3.5" piping
- Replaces the factory downpipe section
- Required match for Redstar 3.5" 765LT exhaust systems
Specifications
- Engine: M840T 4.0L twin-turbo V8
- Pipe diameter: 3.5"
- Material: Inconel
- Catalytic converter: Catless
- Heat shield: Included
Note For off-road and motorsport use only.
Note Redstar specifies that its 3.5" 765LT exhaust systems must be paired with matching 3.5" downpipes: choose them in the downpipe step.
Note Catless downpipes are for off-road and motorsport use only: they are not designed to meet emissions or noise standards and are not for use on public roads.
