Akrapovic Exhaust System for Toyota Supra (A90)

This ECE type-approved system is constructed entirely from high-grade titanium and features an exhaust valve with a housing cast in the in-house foundry. The single muffler arrangement has a unique set of titanium tailpipes, utilising a design not previously seen on an aftermarket exhaust. Fully adapted to the lines of the car, the outer side of the tailpipe has been coated for increased durability, while the inner surface has a bluish-purple natural titanium colour achieved by annealing, plus a stylish and sporty imprint design to give the system a very special and exclusive finish. Through the use of lightweight materials, the system will reduce overall vehicle weight, optimising power and torque through the entire rev range. Different sound modes offer a pleasant experience in comfort mode – without any intrusive drone – and, when the driving gets more dynamic and enthusiastic, the exhaust produces a vibrant and deep roar from the six-cylinder engine, which the Supra is well known for, and adds an exciting and exhilarating sensation as the revs rise.

Optional tuning opportunities exist through the addition of the stainless-steel Evolution Link Pipe set, although fitting the Link Pipe will negate the ECE type approval.

Fitment and ECE type-approval are valid for engine type B58B30C. 

ECE type approval is only valid for cars equipped with otto/gasoline particulate filter. 

For installing the slip-on system, the stock exhaust system has to be cut. Please read the instructions carefully before the start of the installation.

Evolution Link Pipe Set (Titanium) was tested and developed together with the Slip-On Line (Titanium) system.

The Evolution link pipe set upgrades the Slip-On system to the Evolution system. The Evolution link pipe set is constructed from high-quality austenitic stainless steel. It features an arrangement of two central link pipes for the best flow of the exhaust gases from the engine. It is designed to increase power and torque and reduce overall weight, while delivering a deep and sporty sound with no unwanted drone or streaming.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

This evolution link pipe set does not fit on vehicles equipped with Otto particulate filter (OPF).

Evolution Link Pipe Set (Titanium) was tested and developed together with the Slip-On or the Evolution Line (Titanium) system.

The Evolution link pipe set upgrades the Slip-On system to the Evolution system. The Evolution link pipe set is constructed from high-quality austenitic stainless steel. It features an arrangement of two central link pipes for the best flow of the exhaust gases from the engine. It is designed to increase power and torque and reduce overall weight, while delivering a deep and sporty sound with no unwanted drone or streaming.

When installing the Akrapovic Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

This product is crafted from high-quality stainless steel, with the front part of the downpipe cast in Akrapovic’s in-house foundry. A sporty 300 cpsi catalytic converter is integrated into the downpipe, with the heat insulation made of stainless steel and a flexible tube incorporated into the middle section. Power gains with an Evolution Line (Titanium) fitted with the Akrapovic downpipe of 18.7 kW (25.4 hp) at 5,600 rpm and torque increases of 34.7 Nm at 2,400 rpm have been recorded when tested on the Akrapovic dyno against a BMW M440i with the standard stock exhaust. It delivers a pure racing sound, full of emotion and adrenalin-inducing enjoyment, and great feedback at high revs, all without unwanted drone. This product is meant for racetrack use only, and remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals.

The downpipe is an optional product for the following Evolution Line (Titanium) exhaust systems:

BMW M340I (G20) without OPF/GPF: Slip-On Line (Titanium) + Evolution Link pipe (SS) - S-BM/T/17H + E-BM/SS/8

BMW M440I (G22) without OPF/GPF: Slip-On Line (Titanium) + Evolution Link pipe (SS) - S-BM/T/18H + E-BM/SS/8

Fitment notice: Product does not fit on cars equipped with B58TU2 engine.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Downpipe w Cat (SS) was tested and developed together with Evolution Line (Titanium) system.

The high-flow downpipe is constructed using high-quality stainless steel and, once fitted to the Evolution Line exhaust, it creates a complete system from the manifold to the tailpipes that will further enhance the performance figures: both the torque and power outputs. It incorporates a sporty catalytic converter. This optional downpipe produces an enhanced sound that delivers a pure racing emotion and fantastic feedback at high revs, without unwanted drone, making it suitable for everyday use.

When installing the Akrapovic downpipe, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals.

Downpipe is optional product to the following exhaust systems:

BMW M340I (G20) without OPF: Slip-On Line (Titanium) + Link pipe set (SS) - S-BM/T/18H + E-BM/SS/7

BMW M440I (G22) without OPF: Slip-On Line (Titanium) + Link pipe set (SS) - S-BM/T/18H + E-BM/SS/7

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.