Akrapovic Exhaust System for BMW 1M Coupe (E82)

AKRA-BMW-0-KIT

Stock: Backorder Available

AU$3,049.00 Inc GST
Please make selections below to see final price

Mandatory Product


Optional Product


Description

Description

Akrapovic Exhaust System for BMW 1 Series M Coupe (E82)

Primary Components:

Akrapovic Carbon Tail Pipe Set for BMW 1 Series M Coupe (E82) (TP-CT/5)
The tailpipes are the most visible part of the exhaust system, and that’s why we dedicate particular attention to them at Akrapovic. In order to satisfy the most discriminating tastes, we’ve created handcrafted carbon fibre tailpipes. To make our tailpipes stand out from the rest even more, in addition to selecting the finest materials, we also made them larger.

Mandatory Components:

Akrapovic Slip-On Line (Titanium) for BMW 1 Series M Coupe (E82) (M-BM/T/4H)
Utilizing a single muffler arrangement, the fully titanium Akrapovic Slip-On is designed to be modular. In its basic mode, all exhaust gases flow through the muffler, giving you a deeper rumble of an exhaust note compared to stock without any drone. However, the muffler system is built in such a way that by replacing a blocking plate with the optional Akrapovic sound kit valve system the driver is able to noticeably increase the volume of the exhaust at the press of a button. Once activated, the majority of the exhaust gases route through the muffler bypass outlets. Even when installed on an otherwise stock vehicle, power gains are achieved and weight reduction realized. Complete the look with a set of four exquisite tailpipes in titanium or carbon fibre.
Technical Data
Unit Stock Akrapovic Max gain
kW 266.0 / 5650 rpm 269.0 / 5650 rpm + 3.5 / 5670 rpm
HP (m) 361.7 / 5650 rpm 365.8 / 5650 rpm + 4.8 / 5670 rpm
HP (i) 356.8 / 5650 rpm 360.8 / 5650 rpm + 4.7 / 5670 rpm
Nm 542.6 / 2950 rpm 544.3 / 3050 rpm + 4.6 / 3100 rpm
lb-ft 400.2 / 2950 rpm 401.5 / 3050 rpm + 3.4 / 3100 rpm
kg 11.9 10.7 - 1.2
lb 26.2 23.6 - 2.6
% - 10.1
Akrapovic Evolution Line (Titanium) for BMW E82 1 Series M Coupe (ME-BM/T/3)

Our Evolution performance exhaust system, made of our proprietary titanium, includes a muffler, link pipes, and resonators that run from the stock down pipes back. These link pipes feature larger-than-stock-diameter tubing and cast titanium flanges. The secondary catalytic convertors are removed, further decreasing back pressure and weight while at the same time deepening the exhaust tone and increasing power output. For the ultimate in weight reduction, tuning potential, and aggressive racing sound, we offer optional stainless steel catless down pipes. For hardcore enthusiasts. Select the optional Akrapovic sound kit for adjustable sound. Complete the look with a set of four exquisite tailpipes in titanium or carbon fibre.


When installing Akrapovic aftermarket optional down pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Technical Data
Unit Stock Akrapovic Max gain
kW 266.0 / 5650 rpm 272.6 / 5620 rpm + 7.8 / 5850 rpm
HP (m) 361.7 / 5650 rpm 370.6 / 5620 rpm + 10.6 / 5850 rpm
HP (i) 356.8 / 5650 rpm 365.5 / 5620 rpm + 10.4 / 5850 rpm
Nm 542.6 / 2950 rpm 553.6 / 3080 rpm + 16.1 / 3090 rpm
lb-ft 400.2 / 2950 rpm 408.3 / 3080 rpm + 11.9 / 3090 rpm
kg 25.6 16.9 - 8.7
lb 56.4 37.3 - 19.1
% - 34.0
dB 81 / 3750 rpm 83 / 3750 rpm 2

Optional Components:

Akrapovic Sound Kit for BMW 1 Series M Coupe (E82) 2012 (P-HF878)

The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller to regulate the valves.

Pictures are symbolic.

Fitment

Fitment

Akrapovic Exhaust System for BMW 1M Coupe (E82) - AKRA-BMW-0-KIT

Primary Components Fitment:

TP-CT/5
  • BMW - 1 Series M Coupe (E82) (2011 - 2012)

Mandatory Components Fitment:

M-BM/T/4H
  • BMW - 1 Series M Coupe (E82) (2011 - 2012)
ME-BM/T/3
  • BMW - 1 Series M Coupe (E82) (2011 - 2012)

Optional Components Fitment:

P-HF878
  • BMW - 1 Series M Coupe (E82) (2011 - 2012)

Media

Media

Akrapovic Exhaust System for BMW 1 Series M Coupe (E82) - AKRA-BMW-0-KIT


Primary Components:

Akrapovic Carbon Tail Pipe Set for BMW 1 Series M Coupe (E82) (TP-CT/5)
Schematic new version:

Mandatory Components:

Akrapovic Slip-On Line (Titanium) for BMW 1 Series M Coupe (E82) (M-BM/T/4H)
Schematic new version:
Performance graph:
Installation instructions - EN:
Installation instructions - EN:
EC Type-Approval Certificate:
POS HF:

STOCK EXHAUST, BMW 1 SERIES M

SLIP-ON, BMW 1 SERIES M

Akrapovic Evolution Line (Titanium) for BMW E82 1 Series M Coupe (ME-BM/T/3)
Schematic new version:
Performance graph:
Installation instructions - EN:
Installation instructions - EN:
POS HF:

STOCK EXHAUST, BMW 1 SERIES M

EVOLUTION OPEN VALVE, BMW 1 SERIES M

EVOLUTION CLOSED VALVE, BMW 1 SERIES M

Optional Components:

Akrapovic Sound Kit for BMW 1 Series M Coupe (E82) 2012 (P-HF878)
Schematic new version:
Installation instructions - EN:
Installation instructions - EN:

  • Product Question

To top