About this product
2019–2024 RAM 1500 4WD (All Cabs) — excludes Classic body; will not fit eTorque models
Trim models excluded: TRX, diesel engines, Air‑Ride
Please note: RAM trucks with OEM 22" wheels require a larger‑bore steering knuckle due to a larger wheel bearing assembly, and this lift kit will not fit these OEM 22" wheels. Check for build sales code WPM or WPZ on your RAM to see if this applies.
Belltech’s precisely engineered 153712BK kit includes rear Trail Performance twin‑tube shocks. This lift kit improves ride quality, preserves factory alignment cams and specifications, retains factory track width, and most importantly, does not induce bump steer — keeping steering tight and predictable.
Up front, the kit uses durable strut spacers and preload spacers to achieve a full 6" of lift. Replacement spindles are engineered to improve strength and reduce weight while amplifying durability. Belltech lift kits preserve your factory turning radius and steering angle. A ¼" thick laser‑cut skid plate protects the front differential and increases rigidity off‑road.
Also included are easy‑to‑install, durable outer tie rods; a one‑piece differential drop‑down bracket that mimics OE factory alignment adjustability; ¼" thick high‑clearance crossmembers; a front stainless‑steel braided brake line; and a billet aluminium driveshaft spacer.
To achieve lift in the rear, the kit uses two heavy‑duty spring spacers. Belltech engineers developed a rear control‑arm drop‑down bracket that keeps everything centred. This maintains the OE “anti‑squat” and rear axle/suspension dynamics, improving ride quality and safety with increased wet and dry grip. Also included are brake line relocation brackets, extended‑length sway bar links, rear Belltech twin‑tube custom‑tuned Trail Performance shocks, rear bump‑stop extensions, and a track bar relocation bracket to centre the axle and reduce sway/roll while turning.
Belltech lift kits are an easy, direct bolt‑on solution (with high‑quality hardware) requiring no welding, and feature a Limited Lifetime Warranty.
- Precision designed and engineered in the USA
- Includes rear Trail Performance twin‑tube shocks
- Retains factory alignment specifications using factory cams
- Maintains OE front differential geometry and CV angles
- Improved ride quality over factory
- Maintains factory turning radius
- Can use OE wheels and tyres
- ¼" thick steel bracketry for strength under tough conditions
- Easy installation – no welding needed, direct bolt‑on kit
- Retains factory track width
- No bump steer
- High‑clearance crossmembers for superior obstacle clearance off‑road
Wheel and tyre combinations
- 35"x12.5" w/ 20x10 and −18 offset
- 35"x12.5" w/ 20x10 and −19 offset
- 35"x12.5" w/ 20x10 and −25 offset
- 35"x12.5" w/ 20x9 and +0 offset
- 35"x12.5" w/ 20x9 and +1 offset
- 35"x12.5" w/ 20x9 and −12 offset
- 35"x12.5" w/ 22x10 and −18/−19/−25 offset
