BELLTECH 919 LOWERING KIT W/O SHOCKS

919

Stock: Backorder Available

AU$POA

Description

Description

About this product

95-97 Chevrolet Blazer/Jimmy 6 cly. 2" or 3" F/4" R drop

Fitment

Fitment

YearMakeModelSubmodelDrive TypeEngineBody TypeNotes
1995 - 1997ChevroletBlazerBaseRWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"
1996 - 1997ChevroletBlazerLSRWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"
1995 - 1997ChevroletBlazerLTRWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"
1995 - 1996GMCJimmyBaseRWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"
1995 - 1997GMCJimmySLRWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"
1995 - 1997GMCJimmySLERWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"
1995 - 1997GMCJimmySLSRWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"
1995 - 1997GMCJimmySLTRWD4.3LSport UtilityAN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.; Lowering Rate: F: 2.0-3.0" / R: 4.0"

Media

Media

Spacers: PDF

Blocks: PDF

Disclaimer

Disclaimer

Product Disclaimers:

  • When lowering the rear of an S10/S15 4"-6", check the yoke is properly positioned in the transmission. The rear transmission seal must remain in the original position on the yoke.
  • Product Question

To top