BELLTECH 568 LOWERING KIT W/O SHOCKS

568

Stock: Backorder Available

AU$POA

Description

Description

About this product

Vehicle compatibility

  • 1994-2004 GM S10/S15 Extended & Standard Cabs 2WD (4 cyl.)
  • 1982-1993 GM S10/S15 Extended & Standard Cabs 2WD (4 & 6 cyl.)
  • 1983-1994 GM S10 Blazer / Jimmy 2WD (4 & 6 cyl.)

Fitment

Fitment

YearMakeModelSubmodelDrive TypeEngineBody TypeNotes
1983 - 1985ChevroletS10BaseRWD1.9LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1982 - 1985ChevroletS10BaseRWD1.9LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1984ChevroletS10BaseRWD2.0LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1984ChevroletS10BaseRWD2.0LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1985, 2000 - 2003ChevroletS10BaseRWD2.2LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1985, 1994 - 2003ChevroletS10BaseRWD2.2LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1985 - 1993ChevroletS10BaseRWD2.5LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1985 - 1993ChevroletS10BaseRWD2.5LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1993ChevroletS10BaseRWD2.8LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1982 - 1993ChevroletS10BaseRWD2.8LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1988 - 1993ChevroletS10BaseRWD4.3LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1988 - 1993ChevroletS10BaseRWD4.3LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1985ChevroletS10DurangoRWD1.9LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1982 - 1985ChevroletS10DurangoRWD1.9LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1984ChevroletS10DurangoRWD2.0LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1984ChevroletS10DurangoRWD2.0LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1985ChevroletS10DurangoRWD2.2LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1985ChevroletS10DurangoRWD2.2LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1985 - 1990ChevroletS10DurangoRWD2.5LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1985 - 1990ChevroletS10DurangoRWD2.5LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1983 - 1990ChevroletS10DurangoRWD2.8LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1982 - 1990ChevroletS10DurangoRWD2.8LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1988 - 1990ChevroletS10DurangoRWD4.3LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1988 - 1990ChevroletS10DurangoRWD4.3LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1992 - 1993ChevroletS10ELRWD2.5LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1992 - 1993ChevroletS10ELRWD2.8LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1992 - 1993ChevroletS10ELRWD4.3LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1994 - 2003ChevroletS10LSRWD2.2LExtended Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.
1994 - 2003ChevroletS10LSRWD2.2LStandard Cab PickupLowering Rate: 2" or 3" / R: 4" | AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke.

Media

Media

Spacers: PDF

Blocks: PDF

Disclaimer

Disclaimer

Product Disclaimers:

  • When lowering the rear of an S10/S15 by 4"–6", ensure the driveshaft yoke is correctly positioned in the transmission. The rear transmission seal must remain in its original position on the yoke.
  • Listed applications are for 2WD models as specified; verify cab style, engine and drivetrain before purchase.
  • Lowering rates shown (F: 2" or 3" / R: 4") are indicative and may vary by vehicle configuration. Refer to the fitment table for details.
  • Product Question

To top