Akrapovic Exhaust System for Mercedes AMG C63S E Performance (W206/S206)

Precision engineering and design have produced an exhaust that delivers a unique sound from its full high-grade titanium construction. Special collectors inside both mufflers eliminate streaming noise, and inner cones act as acoustic reflectors and partially direct sound from the bumper-mounted tailpipes forward toward the cabin. Sound is linearized through the rev range and engine load, providing a smooth tone at cruising speeds, and as the revs rise the sound becomes more dramatic and sportier. Sound is controlled with two exhaust valves and by a control kit, which monitor driving parameters and precisely control the opening and closing of the valves to create a distinctive and finely tuned sound.

The exhaust is finished with a pair of twin tailpipes constructed from hand-crafted carbon-fibre outer sleeves and high-grade titanium inner sleeves, and the use of lightweight race-proven materials has reduced the weight by 26.5 % (3.6 kg) over the standard stock system. Performance has been enhanced with a power increase of 6.3 kW (8.6 hp) at 6,650 rpm and a torque gain of 13.5 Nm at 2,650 rpm when tested on the Akrapovic dyno against a Mercedes-AMG C 43 4MATIC with a standard stock exhaust. This product is ECE type approved. The plug-and-play installation means no remapping is required. An optional Akrapovic Sound Kit is also available, as well as an optional Evolution Link Pipe Set (SS) for owners looking for an enhanced acoustic experience and greater performance from the Akrapovic Slip-On Line (Titanium) exhaust.

The Slip-On Line (Titanium) exhaust system is ECE type approved for cars equipped with a gasoline particulate filter.

With the Slip-On please choose one of additional mandatory products: Link Pipe set L-ME/T/12 or Evolution Link Pipe Set E-ME/SS/2.

With the installation of the Evolution Link Pipe Set (SS) E-ME/SS/2 and Akrapovic Sound Kit, ECE type approval of the Slip-On Line (Titanium) is no longer valid.

Fitment notice:

For mounting Akrapovic exhaust S-ME/T/4H on Mercedes-AMG C 43 4MATIC (W206, S206) additional original Mercedes parts have to be bought:

  - A 206 885 54 06 (black) or A 206 885 38 05 (carbon) or A 206 885 68 06 (silver): 1 piece

  - A 206 885 53 06 (black) or A 206 885 37 05 (carbon) or A 206 885 67 06 (silver): 1 piece

  - A 206 885 79 03: 1 piece

  - A 206 885 80 03: 1 piece

The Link Pipe Set (Titanium) L-ME/T/10 is a mandatory product to the Slip-On Line (Titanium) S-ME/T/4H.

If the Slip-On Line (Titanium) S-ME/T/4H is combined with optional Evolution Link Pipe Set (Titan) E-ME/T/7, the Link Pipe Set (Titanium) L-ME/T/10 is not needed.

This product is constructed from high-grade titanium for the rear part of the link pipe set, combined with high-grade austenitic stainless steel in the front. Designed as a further enhancement for the Akrapovic Slip-On Line (Titanium) exhaust, its dual tube design minimizes gas flow resistance, and a special resonator eliminates unwanted drone. When combined with the Akrapovic Slip-On Line (Titanium) exhaust, power is increased by 14.3 kW (19.5 hp) at 4,650 rpm, with a torque rise of 29.4 Nm at 4,600 rpm when tested on the Akrapovic dyno against a Mercedes-AMG C 63 S E PERFORMANCE with a standard stock exhaust, and weight is reduced by 6.6 % (0.7 kg) against the standard stock set-up. The sound is a comfortable tone at cruising speeds, rising to a sharper and dynamic sound at higher revs, with precision pops and bangs coming from the tailpipes through gear changes during acceleration.

Installation is plug and play, with no remapping needed and intended for use on closed-course competition circuits. 

With the installation of the Evolution Link Pipe Set (Titanium), ECE type approval of the Slip-On Line (Titanium) is no longer valid.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

If the Evolution Link Pipe Set (Titanium) system is combined with the Slip-On Line (Titanium), the link pipe set L-ME/T/10 is not needed.

 The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver (already included in evolution system) to drive the actuators that either open the valves or setting them in a regulated mode at the end of the exhaust system, drivers can use the Sound Remote Controller to regulate the valves.

With the use of the optional Akrapovic Sound Kit, the ECE type approval is no longer valid.

Pictures are symbolic.