Helping lowered vehicles to avoid road clearance difficulties

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model. HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.

Features:
  • Allows cars with low ground clearance to clear obstacles more easily
  • Available as complete kit including KW coilover kit or as conversion kit
  • Can be activated from inside the vehicle via a LED position control switch or by an optional remote, thereby eliminating any need for interior wiring..
  • Can be activated while driving (up to 80 km/h)
  • Fast lifting Ð maximum lift occurs within 4-5 seconds when using HLS 2.
  • High-quality cylinder unit with durable aluminium construction
  • High quality damper components for a long durability.
  • Sealed unit for corrosion and dirt resistance
  • See notes for specifc vehicle details.
  • Helps to prevent damage to vehicles from road and driveway obstacles
Compatibility list and Notes for the following Vehicles:
ManufacturerModelTypeDetailsBodyYearLowering FALowering RAWeight FAWeight RANotes
Porsche911 Cabrio991911 Cabrio - Petrol - 3800ccmCabriolet12/2011-11/201515/25/3515-35-835-1280
Porsche911 Cabrio991911 Cabrio - Petrol - 3800ccmCabriolet12/2011-11/201515/25/3515-35-835-1280
Porsche911 Cabrio991911 Cabrio - Petrol - 3800ccmCabriolet12/2011-11/201515/25/3515-35-835-1280
Porsche911 Cabrio991911 Cabrio - Petrol - 3800ccmCabriolet12/2011-11/201515/25/3515-35-835-1280
Porsche911 Cabrio991911 Cabrio - Petrol - 3436ccmCabriolet12/2011-11/201515/25/3515-35-835-1280
Porsche911 Cabrio991911 Cabrio - Petrol - 3436ccmCabriolet12/2011-11/201515/25/3515-35-835-1280
Porsche911 Coupe991911 Coupe - Petrol - 3800ccmCoupe12/2011-11/201515/25/3515-35-835-1280
Porsche911 Coupe991911 Coupe - Petrol - 3800ccmCoupe12/2011-11/201515/25/3515-35-835-1280
Porsche911 Coupe991911 Coupe - Petrol - 3800ccmCoupe12/2011-11/201515/25/3515-35-835-1280
Porsche911 Coupe991911 Coupe - Petrol - 3436ccmCoupe12/2011-11/201515/25/3515-35-835-1280
Porsche911 Coupe991911 Coupe - Petrol - 3436ccmCoupe12/2011-11/201515/25/3515-35-835-1280
Porsche911 Coupe991911 Coupe - Petrol - 3800ccmCoupe12/2011-11/201515/25/3515-35-835-1280

KW Automotive Warranty

Effective January 1, 2011. Supersedes all previous terms, policies, and agreements. Not withstanding applicable Australian Law.

KW Suspensions
  • Street Coilovers , Variant 1, Variant 2, Variant 3, Street Comfort and Club Sport Coilovers; 2 Yr/Unlimited Kilometre Warranty.
  • Hydraulic Lift Systems (HLS), Dynamic Lift Control (DLC), Dynamic Damper Control (DDC); 2 Yr/Unlimited Kilometre Warranty.
  • Bushings, Bump stops and Ball Joints; 1Yr/Unlimited Kilometre Warranty.
  • Competition Suspension, 2 and 3 way Race Coilovers; No Warranty.
Warranty Conditions and Limitations
This warranty is NOT TRANSFERRABLE and is limited to Australia. This warranty does not apply to any article not purchased through authorised KW Automotive Australia/Scuderia Autoart Pty Ltd dealers.
This warranty does not apply to:
  • Any articles that show signs of abuse, collision or improper installation.
  • OEM Equipment; Private label items produced by KW automotive (warranty is carried by the private label company unless otherwise specified). Any parts that are installed in vehicles that are used for race purposes, operated commercially, or used in off road conditions.
  • Any parts that have been sold with "No Warranty" designation on the original invoice.
  • Any parts that have been modified or altered in any way from its original configuration.
  • Any parts that have been:
    • Installed improperly.
    • Used out of its published operating range or outside KW tested force ranges, i.e.
      • Used in conjunction with non Non-KW Automotive Australia/Scuderia Autoart Pty ltd approved Air Bag kits, sway bars, springs, control arms etc...
      • Excessively lowered or raised vehicles.

Please see your Dealer or contact us for further warranty claim information

Prices are subject to change without notice.

Scuderia Autoart reserves the right to vary prices in the event of changes due to the exchange rate, price increases, tax changes, import changes or any other reasons. Scuderia Autoart does not accept any liability for increase in prices. Quotes on pricing are appropriate to the particular product at the time of quoting and may change.

Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing. The final product received being different from the product image on the website does not qualify for grounds for return or refund.

SKU 19271653
Brand KW Suspension
Shipping Width 0.460m
Shipping Height 0.250m
Shipping Length 0.760m
Product Question Form
For any questions regarding this product, please fill out the form below:

More From This Category