KW Coilovers Variant 4

High-performance racing technology for daily road use with KW 3-way racing damper adjustment technology

With the KW Variant 4 coilover suspension "inox-line we combine our leading racing technology with a significant increase of everyday suitability for numerous high-performance vehicles. This enables an independent adjustment of the rebound stage damping as well as low-speed and high-speed compression stage damping. KW supplies the Variant 4 with a vehicle-specific performance setting. With the adjustable dampers, drivers can " if necessary " quickly change to a comfort setting by using the integrated setting dials on the damper.

Setup " factory-set pre-configured damper setup with separately 3-way damper adjustment

The three-way adjustable high-performance dampers with the independent setting of the rebound stage by the "TVR-A"-technology as well as the low-speed and high-speed compression stage damping by the "TVCLH-A"-technology are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Nürburgring race and are depending on the vehicle-specific version, braced with aluminum top mounts. The new KW Coilovers Variant 4 are exclusively developed for selected high-performance-vehicles, which due to the sophisticated KW suspension technology can benefit from safer driving at the limits of their driving dynamics.

TVR-A rebound stage damping (Twin Valve Rebound " Adjustable):
The two-step, patented "TVR-A" technology enables the small volume to flow through an adjustable, conical low-speed bypass in the case of slow damper speeds, while in the case of higher piston speeds, the main rebound stage valve opens for the large volume flows. This provides a big improvement in terms of ride comfort without influencing the high-speed in the safety-relevant range. There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control.

 

TVCLH-A compression stage damping (Twin Valve Compression Low Highspeed " Adjustable):
With 6 precise clicks in low-speed and 14 precise clicks in high-speed range of the compression stage damping, the cross sections in the valves are decreased or increased, in order to achieve either more or less compression stage damping. The "TVCLH-A"-technology has a blow-off characteristic with large cross-sections which allows high low-speed forces for an optimum bracing of the vehicle body without raising the body in the case of wheel-induced high damper speeds (driving over curbs). The separate low and high-speed setting is always supplied with an additional rebound setting ("TVR-A"-technology) for an in dependent 3-way damper setting.

Continuous lowering

The KW Variant 4 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after the years.

The benchmark for Coilovers

As with all KW Coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit. After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 4 "inox-line, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and sportier handling while driving.

Manufacturer

Model

Engine

Vehicle shape

Fuel

Performance

Cubic capacity

Cylinder

Drivetrain

BMW 2 Coupe (G42, G87) 08/2021- M2 Coupe Petrol 338 KW 2993 ccm 6 Rear-Wheel Drive
BMW 3 (G20, G80) 11/2018- M3 Saloon Petrol 353 KW 2993 ccm 6 Rear Wheel Drive
BMW 3 (G20, G80) 11/2018- M3 Competition Saloon Petrol 375 KW 2993 ccm 6 Rear Wheel Drive
BMW 4 Coupe (G22, G82) 07/2020- M4 Coupe Petrol 353 KW 2993 ccm 6 Rear Wheel Drive
BMW 4 Coupe (G22, G82) 07/2020- M4 Competition Coupe Petrol 375 KW 2993 ccm 6 Rear Wheel Drive

KW Automotive Warranty

Effective January 1, 2011. Supersedes all previous terms, policies, and agreements. Not withstanding applicable Australian Law.

KW Suspensions
  • Street Coilovers , Variant 1, Variant 2, Variant 3, Street Comfort and Club Sport Coilovers; 2 Yr/Unlimited Kilometre Warranty.
  • Hydraulic Lift Systems (HLS), Dynamic Lift Control (DLC), Dynamic Damper Control (DDC); 2 Yr/Unlimited Kilometre Warranty.
  • Bushings, Bump stops and Ball Joints; 1Yr/Unlimited Kilometre Warranty.
  • Competition Suspension, 2 and 3 way Race Coilovers; No Warranty.
Warranty Conditions and Limitations
This warranty is NOT TRANSFERRABLE and is limited to Australia. This warranty does not apply to any article not purchased through authorised KW Automotive Australia/Scuderia Autoart Pty Ltd dealers.
This warranty does not apply to:
  • Any articles that show signs of abuse, collision or improper installation.
  • OEM Equipment; Private label items produced by KW automotive (warranty is carried by the private label company unless otherwise specified). Any parts that are installed in vehicles that are used for race purposes, operated commercially, or used in off road conditions.
  • Any parts that have been sold with "No Warranty" designation on the original invoice.
  • Any parts that have been modified or altered in any way from its original configuration.
  • Any parts that have been:
    • Installed improperly.
    • Used out of its published operating range or outside KW tested force ranges, i.e.
      • Used in conjunction with non Non-KW Automotive Australia/Scuderia Autoart Pty ltd approved Air Bag kits, sway bars, springs, control arms etc...
      • Excessively lowered or raised vehicles.

Please see your Dealer or contact us for further warranty claim information

* 2=Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers) - 67=Dampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction. - 88=Electronic damping control has to be deactivated. Deactivation kit is included in the delivery.

SKU 3A7200EB
Brand KW Suspension
Shipping Weight 20.0000kg
Shipping Width 0.460m
Shipping Height 0.150m
Shipping Length 0.760m
Type G20
Product Question Form
For any questions regarding this product, please fill out the form below: