The Girodisc system is a direct replacement for the OE disc with the addition of our provided caliper spacers. Our rotor is slightly larger than the OEM rotor at 350mm versus 330mm providing greater braking force and cooling capacity.
The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilises a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilises 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Sold/priced in pairs

Prices are subject to change without notice.

Scuderia Autoart reserves the right to vary prices in the event of changes due to the exchange rate, price increases, tax changes, import changes or any other reasons. Scuderia Autoart does not accept any liability for increase in prices. Quotes on pricing are appropriate to the particular product at the time of quoting and may change.

Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing. The final product received being different from the product image on the website does not qualify for grounds for return or refund.

SKU A1-153
Brand GiroDisc Racing Brakes
Shipping Weight 25.0000kg
Shipping Width 0.200m
Shipping Height 0.360m
Shipping Length 0.360m
Product Question Form
For any questions regarding this product, please fill out the form below:

More From This Category